- 1x push button to flip-sides / mute selectable via jumper
- 2x 3,5mm Inputs for Audio and CV signals
- 2x 3,5mm Outputs for Audio and CV signals
- MUTE ALL
Comes with 3mm Aluminium black front panel with signal white print
and BEFACO KNURLIES.
- HEIGHT: 3U
- WIDTH: 3HP
- POWER CONSUMPTION:
Works great with every stereo audio signal:
- SYNTH´S STEREO OUTS
- STEREO CHANNELS
- STEREO GROUPS like FX, DRUMS, SYNTHS, VOCALS
- STEREO FX SEND AND RETURNS
- MONO FX with STEREO-OUTPUTS
- AUDIO CV-PAN CHANNELS
WITH CV in for MUTE outputs (ALL)
- USE AS STEREO FX SEND CHANNEL with CV-MUTE
WITH CV in for flip-sides
- USE AS 2x MONO FX SEND CHANNELS with CV-flip-sides
- USE AS STEREO DESIGN TOOL on a STEREO-CHANNEL, SUBGROUP with a SEQ. CV-flip-sides
- GREAT ON STERO FX SENDS AND RETURNS, AS WELL
Just change L + R signal with flip-sides active, by human or CV-signal!
Works great with every CV, TRIG, CLK, GATE signal on:
- drum modules
with CV, TRIG, CLK, GATE inputs.
WITH CV in for MUTE outputs (all)
WITH CV in for flip-sides
Just change the rooting of two signals, mute all with flip-sides active and get the most out of your existing eurorack system.
Total control over stereo image in the mix.
Just flip-sides and you will hear the difference!
NOW with CV in and MUTE!
I miss this function on every mixer with stereo channels, stereo FX sends, Subgroups AND – as well – on any DAW…
Use flips-sides active to trigger 2 drum sounds!
You have two drum modules?
Now, you can simple change the Trig.-Seq. between two drum-modules by hand or CV, + CV MUTE.
All with flip-sides active.
Use flips-sides active for CLK signals!
You have two FX-modules with CLK Input?
Now, you can simple change the CLK-Signal between two FX-modules with flip-side active. Different CLK-signals recommended…
Think of using an sequencer for CV in flip-sides and Mute (All) – no CLK signal – get unexpected results…
Sounds great with delays and reverbs.
You have two step-sequencers with CLK Input?
Maybe the same CLK-signal, but one with swing…
Use a step-sequencers for CV flip-sides and Mute (All)
Use flip-sides active with LFOs, ENVs, e.g.
You have a stereo filter with CV Inputs?
Now, you’ll get a more interesting stereo image by changing modulation on L + R s with one dualswitch by hand or CV, + Mute (ALL).
Use flip-sides active for stereo audio signal!
You have a eurorack stereo mixer?
And you mix different drum sounds hard panned?
Now you can easily change L + R channel mix using flip-sides active!
Think off using flip-sides active on every drum break, fill…
Use a sequencer for CV flip-sides and MUTE (ALL) and you will hear the difference!
Use flip-sides active for stereo pad sounds, chords, any instrument!
You want to get the most out of your existing eurorack system?
With CV in for flip-sides and MUTE (ALL) you will get definitively the most out of your patch!
Change L + R channel every NOTE you play….
Use a CLOCK DIVIDER trigger by NOTE ON to control flip-sides active.
Change L + R channel every 2nd, 3rd, 4th, 5th, 6th NOTE you play….
It´s in your hands!
Use flip-sides active for stereo FX SENDS & RETURNS!
You want to get the most out of your existing eurorack stereo effects?
With CV in for flip-sides and MUTE (ALL) you will get definitively the most out of your effects!
Use a sequencer to CV flip-sides and MUTE (ALL) outputs.
Tip: SOUNDS really cool on FX SEND to change the incoming signal – you will hear the difference!
Important : Best results with 100% WET FX signal.
Try it, you´ll buy it!