2x flip-sides active


Features:

  • 2x push buttons to flip-sides
  • 2x 2x 3,5mm Inputs for Audio and CV signals
  • 2x 2x 3,5mm Outputs for Audio and CV signals

CV in:

  • 2x flip-sides
  • 2x MUTE ALL

SPECIALS:

  • no cables patched to Inputs 3+4 – Input 3+4 = Input 1+2
  • no cable patched to MUTE 2 – MUTE 2 = MUTE 1
  • no cable patched to flip-sides 2 – flip-sides 2 = flip-sides 1

Comes with 3mm Aluminium black front panel with signal white print

and BEFACO KNURLIES.


Works great with every stereo audio signal:

  • SYNTH´S STEREO OUTS
  • STEREO CHANNELS
  • STEREO GROUPS like FX, DRUMS, SYNTHS, VOCALS
  • STEREO FX SEND AND RETURNS
  • MONO FX with STEREO-OUTPUTS
  • AUDIO CV-PAN CHANNELS

WITH CV in for MUTE outputs (ALL)

  • USE AS TWO STEREO FX SEND CHANNEL with CV-MUTE
  • USE AS STEREO AND FX STEREO SEND CHANNEL with CV-MUTE (single/linked)

WITH CV in for flip-sides

  • USE AS TWO 2x MONO FX SEND CHANNELS
  • USE AS STEREO DESIGN TOOL on TWO STEREO-CHANNEL, SUBGROUPS
  • USE AS STEREO AND FX SEND CHANNEL
  • USE AS STEREO FX SEND AND RETURN CHANNEL

Just change/mute two L + R signals with flip-sides active, by CV-signal and flip-sides by hand!

Smile!


Works great with every CV, TRIG, CLK, GATE signal on:

  • DRUM MODULES
  • OSCILLATORS
  • FILTERS
  • SEQUENCERS
  • EFXs
  • LFOs
  • ENVs

WITH TWO CV ins for MUTE outputs (1+2, 3+4)

WITH TWO CV ins for flip-sides (1+2, 3+4)

Special:

No cable patched to CV in  flip-sides 2  – flip-sides 2 = flip-sides 1

Use  CV in flip-sides 1 to change between 2x CV an GATE/TRIGGER sequences

With 2xflip-sides active you´ll get the most out of your existing eurorack system.

Total control over stereo image in the mix.

Just flip-sides and mute times two.

You will hear the difference!

2x flip-sides active

I miss this function on every mixer with stereo channels, stereo FX sends, Subgroups AND – as well – on any DAW…

EURORACK RULES

THX DIETER DOEPFER!

PATCHING EXAMPLES:


Use 2xflips-sides active to trigger 2 drum sounds!

You have four drum modules?

Now, you can simple change the Trig.-Seq. between two drum-modules times two by hand or CV,  +  CV MUTE.

All with 2xflip-sides active.


Use 2xflips-sides active for CLK signals!

You have four FX-modules with CLK Input?

Now, you can simple change the CLK-Signal between two FX-modules with flip-side active times two. Different CLK-signals recommended…

Think of using an sequencer for CV in flip-sides and Mute (ALL) – no CLK signal  – get unexpected results…  times two, too.

Sounds great with delays and reverbs.  


You have four step-sequencers with CLK Input?

Maybe the same CLK-signal, but with different swing settings…

Use step-sequencers for CV flip-sides and Mute (All)

Sounds interesting…

SAME, SAME BUT DIFFERENT TIMES TWO.


Use 2xflip-sides active with LFOs, ENVs, e.g.

You have two stereo filter with CV Inputs?

Now, you’ll get a more interesting stereo image by changing modulation on two L + R s with one dualswitch by hand or CV, + Mute (ALL).


Use 2xflip-sides active for stereo audio signal!

You have two eurorack stereo mixer?

And you mix different drum sounds, synth sounds, fx-returns hard panned and/or CV panned mono signals?

Now you can easily change two L + R channel sub mixes using 2xflip-sides active!

Use  sequencers for CV flip-sides and MUTEs (ALL) two stereo sub mixes and you will hear the difference!


Use flip-sides active for stereo pad sounds, chords, any instrument!

You want to get the most out of your existing eurorack system?

With CV in for flip-sides and MUTE (ALL) you will get definitively the most out of your patch!

Change L + R channel every NOTE you play….

Use a CLOCK DIVIDER trigger by NOTE ON to control flip-sides active.

Change L + R channel every 2nd, 3rd, 4th, 5th, 6th NOTE you play….

It´s in your hands!


Use flip-sides active for stereo FX SENDS & RETURNS!

You want to get the most out of your existing eurorack stereo effects?

With CV in for flip-sides and MUTE (ALL) you will get definitively the most out of your effects!

Use a sequencer to CV flip-sides and MUTE (ALL) outputs.

Tip: SOUNDS really cool on FX SEND to change the incoming signal – you will hear the difference!

Important : Best results with 100% WET FX signal.

Try it, you´ll buy it!

I love sounddesign!

 It´s not about panning.

It´s switching!

Something totally different!

 I use both,

LR MS MS LR IN MIND!

Close your eyes and listen!

Be aware of switching sounds (NOT zero-voltage switching sound).

It´s an active DUALSWITCH… your are the master of sound!