2xflip-sides


Features:

  • 2x dualswitch
  • 2x 2x 3,5mm Inputs
  • 2x 2x 3,5mm Outputs
  • for Audio and CV signals

Comes with 3mm Aluminium black front panel with signal white print

and BEFACO KNURLIES.

Cause every passive switch has a relatively short lifetime, the dualswitches are not soldered to pcb and could be easily replaced.


Works great with every stereo audio signal:

  • SYNTH´S STEREO OUTS
  • STEREO CHANNELS
  • STEREO GROUPS like FX, DRUMS, SYNTHS, VOCALS
  • STEREO FX SEND AND RETURNS
  • MONO FX with STEREO-OUTPUTS
  • AUDIO CV-PAN CHANNELS

Specials: No cables patched to INPUT 3+4 – INPUT 3 + 4 = INPUT  1+3

Just change two  L + R signals with 2xflip-sides by hand and smile.


Works great with every CV, TRIG, CLK, GATE signal on:

  • drum modules
  • oscillators
  • filters
  • sequencers
  • fx
  • lfos

Get the most out of your existing eurorack system with 2xflip-sides.

Human control over stereo image in the mix…

Times two!

2xflip-sides

You will hear the difference!

I miss this function on every mixer with stereo channels, stereo FX sends, Subgroups AND – as well – on any DAW…

PATCHING EXAMPLES:


Use 2xflips-sides to trigger 4 drum sounds!

With 2 or 4 trigger signals!

Use 2xflip-sides to flip-sides Inpu1s 1 +2 and Inputs 3+4.


Use 2xflips-sides for CLK signals!

You have four FX-modules with CLK Input?

Now, you can simple change the CLK-Signal between two FX-modules with flip-side times two. Different CLK-signals recommended…

Sounds great with delays and reverbs.


You have four step-sequencers with CLK Input?

Maybe the same CLK-signal, but with different swing amounts.

Sounds great.

Hear the difference.


Use 2xflip-sides with LFOs, ENVs, e.g.

You have two stereo filters with CV Inputs?

Now, you’ll get a more interesting stereo image by changing modulation on two L + R s  by hand.


Use 2xflip-sides for stereo audio signals!

You have two eurorack stereo mixers?

And you mix different drums, synths, fxs sounds hard panned?

Now you can easily change two L + R channels mixes using 2xflip-sides!


Use 2xflip-sides for stereo pad sounds, stereo reverbs !

You want to get the most out of your existing eurorack system?

Now you will get the most out of your patch by using 2yflip-sides to change two L + R channels!

It´s in your hands!

I love sounddesign!

 It´s not about panning.

It´s switching.

Something totally different!

 I use both

LR MS MS LR IN MIND!

Close your eyes and listen!

Be aware of switching  sounds (2 channels  „ON“ at the same time, for 0,.. sec. or NOT  zero-voltage switching sound).

You can miss the sweet spot.. O .. it´s not DIVKIT MUTE… it´s an DUALSWITCH…passive. your are the master of sound!